Buying Power Cords

If you use a computer, you will likely use a power cord. This type of cable carries electricity from the power outlet to the computer’s peripherals. It is subject to numerous international standards, regulations, and markings. Here are some things to keep in mind when buying a cord. Read on to learn more. Listed below are some common types of power cords. Let’s start with the most common types of cords.

First, you need to consider the type of plug that goes into your computer. Power cords typically come with a plug with a C6 receptacle. They come in different types, including C6, SJ, T, and P grades. These grades are based on the conductor’s size in AWG (American wire gauge) or millimeters. Power cords  temporary lighting are also available in different materials. The common materials used to manufacture these cords are PVC and polyvinyl chloride. Growing global environmental regulations have dramatically affected the use and exportability of PVC in electronics. To avoid buying a defective cord, ask for its RoHS or REACH declaration.

In the United States, power cords are typically two-core or three-core depending on the number of phases. Single-phase power distribution systems use 2-core cable. This type of cord has a brown and black live wire, while a green earth wire is added for grounding. Depending on the type of cord you need, you can find many different configurations for your equipment. If you’re not sure what type you need, you should ask your retailer for help.

When buying a power cord, it’s important to consider the voltage requirements of the device you’re using. You’ll also need to consider the environment in which you’re using the cord. If you’re using your cord in a commercial setting, consider the safety of your appliances, as these cords carry a lot of potential dangers from electrical hazards. If you don’t know your voltage requirements and where to buy a power cord, you may end up with an expensive repair bill.

When buying a power cord, make sure to pay attention to the plug and receptacle standards. In the US, NEMA 5-15P plugs are the most common. They are three-wire circuits and are rated for 15 amps at 250 volts. For an extension cord, you should select one that meets the requirements of the receptacle. This type is also referred to as a C13 cord.

The IEC 60320 standard specifies the requirements for power cord appliances. While countries have their own standards, this one is recognized internationally. A “C” in the standard indicates a connector made by the IEC. Different types of connectors are used for different combinations of voltage, current, and temperature. A C13 cord is used mostly in computer applications. It’s important to note that there are different types of cords for different appliances, as some are safer than others.

In addition to the types of power cords, you should also consider the gauge. The gauge, also known as AWG, is a measure of the cord’s strength. Cords with a lower gauge number are generally thicker and can carry more power, especially for appliances with motors. When purchasing a cord, always check its gauge and its length. For larger cords, make sure the gauge is higher. Make sure that the gauge is high enough for the intended use.